manualshive.com logo in svg

Focusrite REDNET D16 AES, User Manual

Share
Download
Focusrite REDNET D16 AES User Manual Download Page 6

6

INTRODUCTION

Thank you for purchasing the Focusrite RedNet D16/D16R.

RedNet D16/D16R is a 1U 19in rack-mount interface featuring 16 channels of AES/EBU connectivity 
to and from a Dante audio network – perfect for bridging between digital consoles, power amplifiers 
or any other AES3 equipped audio equipment and a Dante network.

Dual  Ethernet  connectors  (primary  and  secondary)  on  the  rear-panel  allow  maximum  network 
reliability with seamless switchover to a standby network in the unlikely event of a network failure. 
These ports may also be used to daisy-chain additional units when operating in Switched mode.

RedNet D16/D16R has a Sample Rate Converter (SRC) on each input pair allowing instant operation 
with any AES3 source irrespective of the sample rate or clocking of the Dante audio network.

Audio interface is provided by two standard 8-channel (AES59) Combined Digital I/O DB25 connections. 
In addition, a duplicate of channels 1 & 2 is available on a pair of XLR3 connectors

.

S/PDIF input and outputs are provided on RCA connectors; ideal for connecting CD players or solid-
state recorders. The input replaces channels 3 & 4 in the DB25 connector while the output can be 
assigned to replicate any adjacent odd/even pair.

Word Clock I/O on BNC connectors allows synchronisation of the Dante network to house clock, or 
syncing external equipment to the Dante network. DARS reference can also be accepted via the XLR 
input connector.

The RedNet D16/D16R front panel contains a set of LEDs to confirm network status, sample rate, 
clock sources and signal presence on both input and output.

RedNet D16

RedNet D16R

D16R

Redundant power supplies (PSU A and B) with separate input sockets on the rear panel allow one 

supply to be connected to an uninterruptable source. Each PSU’s status can be monitored remotely 

over the network or from the front panel.

Summary of Contents for REDNET D16 AES



















Reviews:

No comments

Brands by name

Popular brands

Load more brands