Focus HMI PLC USER MANUAL
Fultek Kontrol Sistemleri San. Ve Tic. Ltd. Sti.
Address: Buyuksehir Mah. Cumhuriyet Cad. Ekinoks E2 Blok K:2 D:8 Beylikduzu / ISTANBUL
Phone: +90 212 871 0128 / Email: [email protected] / Web site: www.fultek.com.tr
E.
OTHER FEATURES
Modbus Communication:
Modbus RTU ve Modbus TCP ile haberleşmeyi
desteklemektedir. 5 connections can be provided simultaneously with Modbus TCP. Up to
32 devices can be connected with the Modbus RTU from each serial port.
Speed PLC BUS:
With the Speed PLC BUS communication protocol which
developed by Fultek Control Systems, intelligent read and the ability to write different
data fields features provides faster communication. You can find detailed information in
the help section of the Speed PLC program.
MAC Address:
The MAC address of the integrated PLC module is located on the
product label. If you wish, you can change the MAC address in the DB0 data block with
the Speed PLC program. When changing the MAC address, check that the same MAC
address is not on the network. Do not forget that communication problems with the PLC
may occur in case of conflicting MAC addresses.
Ethernet Connection:
If you wish, you
can connect the integrated PLC module
on your local network or connect it
directly on your computer without cross
cable. To make a direct connection to
your computer, you must set settings of
your network adapter, as shown in the
figure and then connect the Ethernet
cable.
Factory Settings:
Off the power of integrated PLC module. Supply the integrated
PLC module while pressing and holding the PLC Run/Stop button. Release the button
when the Run LED is turned on, the PLC will return to the factory settings. COM0 Serial
port at factory settings: 115200 bps, none parity, 1 stop bit, 8 data bit.
IP address factory setting: 192.168.0.10. Modbus PLC address factory setting: 0.
RTC:
Real Time Clock life is 30 days, during this time if the PLC is not energized,
System Fault LED lights on. You can remove this warning when you update the system
time in Speed PLC DB0.
Summary of Contents for HMI Basic
Page 1: ...FOCUS HMI PLC USER MANUAL...
