5
Set Up
Reference page
Note
•
Monitor to be connected
–
Connecting with some monitors may cause picture vibration and/or picture distortion at the top or bottom of the image at still
picture or normal playback.
–
A television for domestic use may easily cause the picture vibration and distortion.
•
CCD camera to be connected
–
Do not connect color and black-and-white cameras together.
Connecting with CCD Camera, Monitor and Sensor
Language Selection
The menu which appears on screen offers three languages: English (ENGLISH), Spanish (ESPAÑOL), or French (FRANÇAIS).
This menu appears by pressing the MENU button when the VCR is turned on for the first time after the purchase or when the
RESET button is pressed during use.
1. Press the MENU button.
•
The menu appears as shown to the right.
2. Turn the JOG dial to select the desired language.
3. Turn the SHUTTLE ring to the right.
•
<MAIN MENU> appears on screen in the selected language.
4. Press the MENU button to exit.
Note
•
After first time setup and selecting the language to be used, the only way to go back
and access the main menu in the three languages is to PRESS the RESET button
found on the back panel. The RESET button can be accessed with a small pointed
object. Once the RESET button is pressed, repeat steps 1 to 4 above.
AUDIO
VIDEO
OUT
OUT
IN
IN
RESET
RST
IN
REC GND ALM
ALM
MODE
CLK
OUT
CALL
CCD CAMERA
MONITOR
MOTION DETECTOR,
SURFACE CONTACTS,
etc.
RJ-11E terminal
VCR cable
BNC-RCA adapter
VCR REAR
GND
ALM IN
VIDEO IN,
VIDEO OUT
AUDIO IN,
AUDIO OUT
ENGLISH
FRANÇAIS
ESPAÑOL
Use JOG to select,
and ENTER .
