Focke Wulf FW 44 ARF 8
Installation of engine, tank and radio
We installed an OS .90 4-stroke
surpass engine and used a flexible header
to lead the exhaust under the fuselage in a
near scale fashion. We also used a 12 Oz.
tank.
1. Remove the dummy engine by
loosening the two screws in the front col-
lector ring and remove the 2 2 mm screws
and nuts that holds the exhaust tube.
2. Drill the holes in the engine mount
and install 4 6-32 blind nuts for the engine
bolts.
3. Cut out for the engine in the top
cover panel. and drill the hole for the header
in the engine mounting board and in the bot-
tom cover.
Header exit in
line with dummy silencer
One dummy cylinder is
removed
Throttle
linkage
and fuel
tubings
Header
Cut out in
top panel
Dummy
exhaust tube may be left
for appearance
Radio switch on
forward cockpit
instrument panel
Landing gear secured
with 3 mm bolts and
lock nuts
Fuel
filing
tube
Throttle needle
