Please note: This section applies to a fridge/freezer which doors open from the
right hand side. If your fridge/freezer doors open from the left hand side then
installation stages will need to be reversed.
A) Install the application towards the left hand side of the housing unit
leaving a gap of approximately 5mm. As shown in Figure 29.
B) Fix the appliance to the top shelf of the housing unit.As shown in Figure 30.
IMPORTANT: This will help to keep the appliance vertically parallel with the
décor doors.
C) Measure a distance of approximately 40mm between the front edge of the
housing unit and the front edge of the appliance. As shown in Figure 31.
D) Fix the appliance into position. As shown in Figure 32.
E) Trim the side gasket to an approximate size and then insert it into the 5mm gap
that you left on step A. As shown in Figure 33.
19
©
2013 Focal Point Fires plc.
8.5 INSTALLING YOUR FRIDGE FREEZER
GB IE
Figure 29
Figure 30
Figure 31
Figure 32
Figure 33
Downloaded from
www.Manualslib.com
manuals search engine
