4.0 ASSEMBLY
3
GB IE
© 2014 Focal Point Fires plc.
Fixings Parts
D x 12 PCS 1
7
8
D
D
Gently lay both legs you have prepared onto a suitable protected surface. Be extremely careful not to scratch the front edges
of the legs. DO NOT DRAG THE LEGS! Make sure that the legs are lifted everytime they are moved to avoid them from being
damaged.
Use 6 wood screws (D) to screw the right leg (8) to the back board (1). Repeat the process for the left leg using the left leg
(7) and back board (1).
STEP 1
STEP 2
Fit the cam locks (B) into side panels (7&8). Using a drop of glue (I) in each dowel hole, insert 2 dowels (A) in to the right leg
(8), and repeat on the left leg (7). Screw the cam bolts (C) into the top panel (2) and put a little glue (I) into the dowel holes.
Place the top panel (2) onto the surround, ensuring that the cam bolts (C) and dowels (A) line up with the relevant holes. Push
down, check there are no gaps and tighten the cam locks (B). This surround now has a rebate depth of 95mm, proceed with
step 3 for a 75mm rebate or step 4 for a 25mm rebate.
Fixings Parts
A x 4 PCS 1
B x 4 PCS 2
C x 4 PCS 7
8
A
⑦
⑧
①
A
C
C
B
B
②
⑦
⑧
①
D
D
D
D
D
D
D
D
D
D
C
C
C
C
A A
A
A
B B
B
B
