FOCAL MANAGER DSA 500 RT EXPERT PERFORMANCE
U s e r m a n u a l
5
ì+DUGZDUHFRQQHFWLRQ
Communication between your MAC/PC computer and the DSA 500 RT is realised via a standard USB connector.
The mini-USB connection is found at the back of the remote control supplied.
Use the supplied mini-USB connector and attach a suitable USB cable.
Do not connect the DSA 500 RT before installing the software.
For all additional information concerning this connection, please refer to the installation guide for your DSA 500 RT.
ì5($/7,0(FRQQHFWLRQ
Once the software has been correctly installed, the REAL TIME configuration phase will be launched automatically when
the USB cable is connected.
If unsure, disconnect and reconnect the USB when the software is running to establish a connection.
No further operations are necessary from within the software. The connection is made automatically.
Once the connection has been correctly established, a welcome message will appear offering different options for using
the current configuration saved in DSA 500 RT.
ì
:DUQLQJ
The screen captures used in this user manual were created under a Windows operating system. The visual appearance
of the screen may differ slightly when this software is used under a MAC OS operating system.
ì
+HOSIXOLQIRUPDWLRQ
Two types of information will be given in this user manual:
,1'(7$,/
VHFWLRQ'HWDLOHGH[SODQDWLRQVRQDFFHVVLEOHDXGLRFRQILJXUDWLRQVDQGWKHDFRXVWLFSKHQRPHQDWKH\DUH
XVHGWRFRQWURO
86()8/
VHFWLRQ7LSVRQXVLQJWKHVRIWZDUHLQWHUIDFHLQRUGHUWRVSHHGXSWKHFRQILJXUDWLRQDQGIDPLOLDULVDWLRQ
SURFHVVRI\RXU'6$57