4
FOCAL DIRECT FET
®
PERFORMANCE
U s e r m a n u a l
WARNING
• Do not operate any functions which may distract you while driving.
Functions requiring sustained attention must
only be used when the vehicle is at a complete standstill. Always make sure to stop your vehicle in a safe place
before operating these functions. Failure to do so may cause an accident.
• Keep the volume at a low level to be able to hear exterior noises while driving the vehicle.
Failure to do so may
cause an accident.
• Do not open your FD amplifier or make any modifications to the product.
Failure to do so may cause an accident,
a fire or an electric shock.
• Only use your FD amplifier with 12V mobile applications.
Any use other than the intended use may cause a fire,
an electric shock or injury.
• Use fuses with the adequate amperage.
Failure to do so may cause a fire or an electric shock.
• Do not obstruct the heat sink on your FD amplifier.
Internal overheating may occur and cause a fire.
• Wire the connections correctly. Make sure you use the appropriate wire gauge and type of cable.
Failure to do so
may cause a fire, injury and/or material damage.
• Do not use nuts or bolts on steering or breaking systems, tanks, seat-belt anchor points or other safety
elements for connecting the ground.
Using of these parts as ground may deactivate the vehicle’s control system
and cause a fire or other damage.
• Keep small parts which could be swallowed, such as bolts, accessories or screws out of the reach of children.
Swallowing such parts may cause to serious injury. If swallowed, consult a physician.
• Before beginning installation, disconnect the negative terminal of the battery to avoid any risk of injury, fire or
material damage.
(fig. 1)
fig. 1
