background image

EN

READ FIRST !

IMPORTANT SAFETY INSTRUCTIONS !

English

The bolt of lightning in an equilateral triangle 
warns the user that the device has high 
voltage that could result in a risk of electric 
shock.

Warning: To prevent any risk of electric shock, 
do not remove the cover (or the back) from 
the device. There are no user-serviceable parts 
in this device. For maintenance or repairs, 
contact a qualified professional.

The exclamation mark in an equilateral triangle 
warns the user that the manual contains 
important instructions on how to use and look 
after the device.

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus  
near water.
6. Clean only  
with dry cloth.
7. Do not block any ventilation 
openings. Install in accordance with 
the manufacturer’s instructions.
8. Do not install near any heat sources 
such as radiators, heat registers, 
stoves, or other apparatus (including 
amplifiers) that produce heat.
9. Do not defeat the safety purpose 
of the polarized plug. A polarized 
plug has two blades with one wider 
than the other. The wide bladed 
is provided for your safety. If the 
provided plug does not fit into your 
outlet, consult an electrician for 
replacement of the obsolete outlet.
10. Protect the power cord from being 
walked on or pinched particularly at 
plugs, convenience receptacles, and 
the point where they exit from the 
apparatus.
11. Only use attachments/accessories 
specified by the manufacturer.
12. Use only with the cart, stand, 
tripod, bracket, or table specified 
by the manufacturer, or sold with 
the apparatus. When a cart is used, 
use caution when moving the cart/
apparatus combination to avoid injury 
from tip-over.
13. Unplug this apparatus during 
lightning storms or when unused for 
long periods of time.
14. Refer all servicing to qualified 
service personnel. Servicing is 
required when the apparatus has 
been damaged in any way, such 
as power-supply cord or plug is 
damaged, liquid has been spilled or 
objects have fallen into the apparatus, 
the apparatus has been exposed to 
rain or moisture, does not operate 
normally, or has been dropped.

15. This product is a device belonging 
to Class 1. Only plug in the device 
using the mains plug provided, which 
incorporates an earth connection. 
The device must be plugged into an 
earthed mains socket.
16. When the On/Off switch, or the 
mains plug or adapter connected to 
the product is used as a disconnect 
device, this device must remain 
readily accessible.
17. WARNING: To reduce the risk of 
fire or electric shock, do not expose 
this apparatus to water, rain or 
moisture. And the apparatus shall not 
be exposed to dripping or splashing 
and that no object filled with liquids, 
such as vases, shall be placed on the 
apparatus.
18. Do not obstruct ventilation 
openings.
19. Do not insert any objects into the 
device’s ventilation openings. They 
could come into contact with one 
of the high-voltage components or 
short-circuit them and cause a fire or 
electric shock. Do not spill liquid on 
the device.
20. Do not attempt to repair this 
device yourself. Opening it may 
expose you to hazardous voltages 
or to other risks. Contact a qualified 
professional for all maintenance work.
21. The equipment shall be used at 
maximum 35 degree Celsius ambient 
temperature (95°F).
22. Do not use this device in tropical 
climates.
23. Do not use this device at altitudes 
of more than 2,000 m (6,500 ft).
24. Do not overload wall sockets, 
extension leads or multiple socket 
outlets as this could cause fire or 
electric shock.
25. The device must not be mounted 
to a wall or ceiling unless intended by 
the manufacturer.

26. If the product has been 
transported from a cold to a warm 
environment, make sure that no 
condensation has occurred before 
connecting the power cord.
27. No naked flame sources, such as 
lit candles, should be placed on top 
of the device.
28. The product should only be 
connected to the mains power type 
shown on the label on the device. If 
you’re not sure what type of mains 
electrical supply you have, ask your 
retailer or your electricity supplier. 
For devices intended for use with a 
battery or another power source, see 
the user manual.
29. Always leave a distance of at least 
5 cm (2”) around the product for 
proper ventilation.
30. When replacement components 
are needed, make sure that the 
maintenance technician uses the 
components recommended by the 
manufacturer or components with 
the same technical features as the 
original product. Using non-compliant 
components could cause fires, electric 
shocks or other risks.
31. After any maintenance or 
repair work on the device, ask the 
maintenance technician to test it to 
check that it works safely.
32. To avoid damaging your hearing, 
do not listen to loudspeakers at high 
volumes for long periods of time.
Listening to speakers at high 
volumes can cause damage to the 
user’s ears and may lead to hearing 
problems (temporary or permanent 
deafness, buzzing in the ears, tinnitus, 
hyperacusis).
Exposure to excessive volumes (over 
85 dB) for more than one hour can 
cause irreparable damage to your 
hearing.

(CEI 60417-6044)

Canada : 

Industry Canada Statement:

This device complies with ISED’s licence-exempt RSSs. Operation is subject 

to the following two conditions: (1) This device may not cause harmful 

interference, and (2) this device must accept any interference received, 

including interference that may cause undesired operation.

Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils 

radio exempts de licence. L’exploitation est autorisée aux deux conditions 

suivantes : (1) le dispositif ne doit pas produire de brouillage préjudiciable, et 

(2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage 

susceptible de provoquer un fonctionnement indésirable. 

USA : 

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject 

to the following two conditions: (1) This device may not cause harmful 

interference, and (2) this device must accept any interference received, 

including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a 

Class B digital device, pursuant to Part 15 of the FCC Rules.  These limits are 

designed to provide reasonable protection against harmful interference in a 

residential installation. However, there is no guarantee that interference will 

not occur in a particular installation.

Summary of Contents for ALPHA EVO
















Reviews: