The wiring in the mains lead is coloured as follows:
Brown
Live
Blue
Neutral
Green and yellow
Earth
As the colours of the wires in the appliance’s mains lead may not correspond with coloured markings identifying the terminals in your
spur box, please proceed as following:
The Brown wire must be connected to the terminal marked “L” (Live) or coloured Red.
The Blue wire must be connected to the terminal marked “N” (Neutral) or coloured Black.
The Green and Yellow wire must be connected to the terminal marked “E” (Earth), or by the earth symbol or coloured Green
and Yellow.
When the connection is completed no stray strands or cut wire should be present. The cord clamp must be secured over the outer
sheath.
It is advised that the appliance is only installed in a location where the ambient temperature of the room, corresponds with the
climate classification that is stated on the rating plate of the appliance. The appliance may not function correctly if the ambient
temperature falls outside of the following ranges.
The appliance should not be located in direct sunlight or exposed to continuous heat or extremes of temperature (e.g. next to a
radiator or boiler).
The door should be able to open completely and freely.
The appliance should be situated so the food stored inside can be easily accessed.
Check whether there is an electrical socket available, which will be accessible after the appliance is installed.
Place the fridge in a location with a firm base. In order to prevent vibration and noise, the freezer must be levelled by adjusting the
front feet.
Choose a well ventilated location with no less than 10cm clearance around the freezer.
9
9.1 ELECTRICAL CONNECTION
GB IE
Climate Classification
Appropriate Ambient Temperature
SN
+ 10 to + 32 degrees centigrade
N
+ 16 to + 32 degrees centigrade
ST
+ 18 to + 38 degrees centigrade
9.2 POSITIONING
©
2017 Focal Point Fires plc.
