removed by using a damp cloth and mild household detergent. Brass parts of the firefront may be cleaned using a suitable
brass cleaner. Replace the front centrally against the fire after cleaning. Do not use a damp cloth to clean cast iron fronts (Soho,
Finsbury and Arch models) as this can cause the fronts to rust.
PAINTED AREAS - These can be cleaned using a dry cloth.
COALS AND CERAMICS - Remove the firefront and place to one side. Remove the ceramic components. Gently clean in the
open air. Be careful not to create dust from the coals. Where necessary replace damaged components with genuine spares. Seal
scrap components in plastic bags and dispose of at proper refuse sites as directed.
Re-fit the ceramics carefully by referring to section 6.0 of these instructions.
Slide control models only : Ensure appliance is off and cool
. The battery is located underneath the ignition unit, on the left hand
side of the burner. Insert 1 x ‘PP3’ (9 volt) battery.
5
©
2010 Focal Point Fires plc.
8.0 CLEANING - CONTINUED
GB IE
9.0 REPLACING THE BATTERIES
Item
Part number
Pack of 16 coals
F550038
Pack of 16 pebbles
F550050
Front ceramic strip - coal
F780008
Front ceramic strip - pebble
F780017
Ceramic combustion matrix - coal
F780007
Ceramic combustion matrix - pebble
F780016
Ceramic pad set (includes rear pad and side pads)
F550049
Oxypilot 9081 - All models
F730006
Gas valve - manual control models
F730066
Gas valve - slide control models
F730067
Injector - stereo 81 - manual and remote control models
F730046
Injector - stereo 82 - slide control models
F730077
HT lead/piezo assembly
F750081
Burner assembly - complete - manual control
TRAY015
Burner assembly - complete - slide control
TRAY087
10.0 LIST OF REPLACEMENT PARTS
