Focal Meditech ADL-Stand, User Manual

Page: 8 / 15

14 15
Fold and fold out the ADL-Stand
If ADL-Stand is not used for a while it is recommended to fold the rod system. This will provide
a safe situation for both ADL-Stand and its surrounding. The same procedure apply for the table
clamp and the chair.
Fold the ADL-Stand
STEP 1:
Remove cups and or other parts that not belong to the ADL-Stand
STEP 2:
Loosen the clamping lever
STEP 3:
Rotate the rod system downwards
STEP 4:
Tighten the clamping lever
Fold out the ADL-Stand
STEP 1:
Loosen the clamping lever
STEP 2:
Rotate the rod system to the desired height
STEP 3:
Tighten the clamping lever
STEP 4:
Check if the settings are right and if the ADL-Stand is safe to use
Warning: Check always (after folding out) the settings of the ADL-Stand for tilting issues
and or loosen bolts/knobs.
Adjusting the angle of the ADL-Stand
In order to adjust the angle of the ADL-Stand, loosen the clamping lever. The rod system can be
tilted up or down to the desired location. Tighten the clamping lever when the ADL-Stand is at
the desired angle. Adjust the gooseneck so that the top of the cup-holder is parallel with the
floor.
Warning: Check before using the ADL-Stand always if all knobs and bolts are tightened.