foc.us GAMER, User Manual

Page: 7 / 13

10 11
Random-noise current
Random-noise current changes randomly
between 0.5 mA and the specifi ed
maximum current for the duration of the
session.
Logo: The logo brightness will change
erratically for fi ve seconds.
WARNING:
Random-noise current
can be the most uncomfortable of the
modes because of the sudden changes
in current.
Sham (Bluetooth control only)
Sham mode is only available via
Bluetooth connection and cannot be set
manually.
In sham mode, the current will ramp up,
but then ramp off . The logo will remain
lit for the duration of the session as if in
constant-current mode.
Current Settings
Once you have selected a mode, you can select the current level.
The logo will glow for three seconds at varying levels of brightness to indicate the
current level. Tapping the touch sensor during the desired mode will select it. The
foc.us headset supports four current levels:
Low, Medium, High, and Maximum.
Low: 0.8 mA
Medium 1.2 mA
High 1.5 mA
Maximum 2.0 mA
Note: Maximum is only available when external electrodes are connected.
Once a current has been selected, the device will return to the ready state.
How to confi rm settings
Tap the touch sensor three times; the logo will fl ash, showing the mode and then
the current level.