35 |
P a g e
become damaged. This can cause the FOBO to provide improper readings, or
might cause a loss of air pressure. We recommend that you carefully assess
the fitment of your rims, wheels, tires and the FOBO on your vehicle. If you
have any concerns, consult with your tire shop or auto mechanic.
5.5
Sensor rotation
It is good practice to rotate your tire positions regularly to balance the thread
wear of your tires, usually swapping the front tires with the rear tires. FOBO
Ultra is designed to conveniently set the sensors to their correct tire position in
the in-car unit after you have swapped your tires on your vehicle. You do not
need to physically remove the sensors. To correct the position of the sensors
in the in-car unit/Repeater, please select “Tire Rotation” under Main Menu on
in-car unit/Repeater. You will be prompted by the in-car unit/Repeater to:
1)
Select the sensor position to rotate. Move to the desired position to
select the sensor by using the arrow key which is in the middle of the in-
car unit/Repeater.
2)
Upon selection, you will be prompted to touch the sensor at the in-car
unit /Repeater NFC location -
3)
There will be a message to indicate successful registration of new
position.
4)
Choose NEXT to go to another tire position to rotate.
5)
Choose END to complete the rotation process.
You are now ready to use FOBO Ultra with the new tire positions. You can
perform tire rotation as often as you want.
5.6
Disable sensor and Replace new sensor
You may want to disable a sensor due to a missing sensor or damaged sensor
or to install a replacement sensor. Disabling a missing or damaged sensor will
remove future missing sensor alerts.
To disable a tire sensor:
-
1.
Go to Sensor Management in the Menu of In-Car/Repeater, select
“Disable sensor”.
2.
Select the tire position in the screen to disable.