- 18 -
Start manual weighing by pressing the ENT key until the message
-ACC- is shown in the
display:
In the display auxiliary 2 is shown the number of weight performed, in the display auxiliary
3 the subtotal of weight accumulated so far.
If the unit is connected to a printer, and, for example, the code "100350" has been entered
(using the -CODE- option in the functions menu), the following ticket will have been
printed:
To perform a new weighing and continue to accumulate, we remove the weight on the
platform and place on it the new weight to accumulate, we wait until it is stable and again
press the ENTER key.
At the same time, if a PC connection has been configured in any of the serial
communication PORTS with MANUAL send, pressing the T key causes a frame to be sent
with the weight on the platform at this moment.
========================================
N.WEIGH. CODE TARE kg NET kg
========================================
1 100350 * 1.538 0.216
If the code introduced is 0 (default value when starting up the unit), nothing
appears in the CODE field of the ticket.
All the unit's serial communication PORTS can be configured (from the
-COM-programming submenu) to connect to a printer, a labeller, a repeater
or a PC in order to send weights.