background image

 

 

3  

B 270-22-F+CRN 20-3 - 7009065_ 

UK – 27.09.2017 

 

Introduction 

 

FOAMICO congratulates you with your new Booster system. B 270-22 are developed to connect to 
FOAMICO Cleaning systems, satellites S 0125. The Booster series are developed to be used for professional 
cleaning purpose. The system is manufactured mainly of high grad stainless steel. It is designed to meet 
today’s high hygiene standards. 

Attention!  This Manual is part of a bigger reference library. Before the Booster is installed and set 
into operation, the Grundfos Hydro Multi-E installations- and directions for use must be read 
carefully. 

 

Attention! 

 To use and operate the system this manual must be read carefully. 

1.1  Condition of liability 

The responsibility for the treatment and operation in an appropriate manner rests with each individual user. 
Thus it is of great importance that this manual is available to the sanitary employee at any time 

1.2  Guarantee conditions. 

For a period of 12 months from the date of delivery your dealer warrants for parts which don’t function due 
to defects of material or production. This guarantee does not cover wearing parts (as described in the section 
about spare parts). This guarantee is covering the replacement or repair of the defect part. Any dismounting, 
forwarding, and mounting expenses are paid by the purchaser. The costs for any possible return from 
FOAMICO after finished repairs rest with FOAMICO. The defect parts are the property of FOAMICO 
 
Claims which might be raised for any other legal reason, or normal wear and tear, as well as damage on parts 
which can be related to negligent or wrong treatment, are not covered by this guarantee.  
 
This guarantee does not cover at all, if the system has been exposed to frost.  
 
This guarantee becomes void if changes or repairs have been implemented by non-authorized persons. Any 
claims under the guarantee will only be accepted if they are announced to 
 
FOAMICO immediately after the damage has been observed. This guarantee becomes void as soon as the 
system changes ownership.  
 
Dealers and FOAMICO cannot be held responsible for personal injuries, damages to equipment, loss of 
earning including those caused by production loss, loss of stock or the like, which might arise from 
inappropriate or delayed delivery of the sold product, regardless the reason, including defects in production 
or material. In addition, please read our usual terms of sale and delivery 

 

WARNING 
Due to the nature of low pressure cleaning systems Pressure surges can occur. The installer is responsible for 
dimensioning the supply line to be able to adapt Pressure surge. 
Dealers and FOAMICO cannot be held responsible for personal injuries, damages to equipment surrounding 
rooms, Water Supply line or water outlet line.  
 

1.3  Protection against frost 

The equipment should only be installed in frost free rooms. 
Prior to being exposed to frost, the system must be emptied for water (frost protected). Even shorter periods 
of exposure to frost can damage the equipment. 

Summary of Contents for 7009065




















Reviews: