©2004 FoamFly.com
4
And of course even a foam plane needs a few odds and ends to tie everything
together. Take a few moments to inspect what you’ve got here. As the items are
called for you’ll get more info on their intended uses.
b) Non-Foam
Parts:
i)
Bamboo Skewers (2)
ii)
Wood Motor Mount
iii) Laser Cut Control Horns
iv) Wood Wing Reinforcement
v)
Du-Bro Pushrod Connectors
vi) Rubber
Bands
vii) .032” Wire pushrods
viii) Elevator Joiner Wire
ix) .055” Landing Gear Wire
x)
Foam Tire material
xi) Aluminum Wheel hubs
You’ll need a few miscellaneous items to complete your plane, see the
appendix for a list.
Now we get to begin the process. You’ll notice that some of the parts are
attached together on the “parts sheets.” Before you can use any of these
you’ll need to cut them free. Using your razor knife, slice through the tabs
and free the parts.
Note: I recommend you test fit the parts at each step before applying glue…
