Marine Diesel Engines
O
WNER
’
S
M
ANUAL
Engine
maintenance
HPE300
ENG rel. 1/11
www.fnm-marine.com
65
Every 200 hours or Once every year
Every 200 hours or once every year
Activities
Achievable
by owner
Achievable
by
service
Oil change (page 65)
*
*
Oil filter change (page 66)
*
Fuel filter change (page 67)
*
Gearbox oil change (
once every year or 300 hrs for ZF®/1000 hrs for Technodrive®
)
*
Verify/replace engine anodes - stern drive - propeller (page 61)
*
*
Check the belts and tighteners status (page 62)
*
*
Verify the engines alignment and retorque the engine mounts
*
Verify the bolts tightening torque.
*
Verify the electrical connections.
*
Check the transmission fluids levels (page 55).
*
Clean the air filter (page 63).
*
*
Replace the sea water pump impeller (page 63).
*
*
Clean the heat exchangers tube bundles. (page 67).
*
*
Stern drive lube oil change (Mercruiser ® Stern drives 100 hrs - SeaProp
once a year).
*
Inspect and lubricate the joints, gears and splines (page 70).
*
*
Grease the engine starter pinion (page 70).
*
Check the Mercathode® systems
continuity (follow the producer’s
instruction.
*
Check and grease the steering system.
*
Engine oil change
Follow the procedure below:
1. Turn off the engine .
2. Let the engine cool down adequately for at least 20 minutes, to help oil flowing in the sump.
3. Prepare a tank of proper capacity to collect exhaust oil.
4. Connect a hose to the exhaust valve placed in position A.
A
B
Summary of Contents for HPE 300
Page 1: ...OWNER S MANUAL HPE 300...
Page 78: ...www fnm marine com...
