2
一、Overview
FNC88 Type-C tester is a high-reliability, high-safety Type-C voltage and current detection
meter and a fast charge trigger device for mobile communication terminals. With 0.96 inch TFT
LCD display. Use an external 16-bit ADC, PD protocol physical chip. It can be used to measure the
power supply or power consumption of Type-C interface, mobile phone chargers, U disks and other
products; it can be used to measure the charging power of mobile phones, the input and output of
mobile power; and it can be used to test the fast charging protocol of chargers..
This instruction manual includes relevant safety information, warning tips and solutions to
common abnormal conditions, please read the relevant content carefully and strictly observe all
warnings and precautions.
二、Pay attention to safety matters
1
、
Do not connect a power supply exceeding 24V to the tester.
2
、
FNC88 supports high power input (such as 20V * 5A = 100W).
3
、
HID-USB interface is only used for data transmission.
4
、
When using high voltage and high power work, the temperature of the tester will rise,
please be careful to prevent burns.
三、
3. Appearance and structure diagram (see Figure 1)
1
、
HID-USB data transmission
2
、
Type-C male connector
3
、
<Button, page / select button
4
、
OK button, function button
5
、
> Button, page / select button
6
、
CC pull-down switch for PD protocol communication
7
、
Type-C female connector
Summary of Contents for FNC88
Page 1: ...FNC88 manual V2 0...
