line aux <line number>
description DHCPatriot-<#> console
password <your password>
login
transport input telnet
terminal-type vt100
Console from an OCTAL cable connected to an ASYNC port
Connect the desired octal cable to the Female RJ45 on the console shell attached to
the desired DHCPatriot device. Configure the ASYNC port thus for console access:
line async <line number>
description DHCPatriot-<#> console
password <your password>
login
transport input telnet
terminal-type vt100
Console from a serial (DB9) port on a standard PC
A ‘Null Modem’ shell must be created. If you have a standard Female DB9 to Female
RJ45 blank shell (converter), the pin out is shown in the chart to the right.
Attach this ‘Null Modem’ shell to your favorite serial port on your standard PC (laptops
work great in this mobile type situation).
Microsoft® Windows® based
instructions:
• Using Hyperterminal (or
equivalent), connect to the serial
port (usually COM1 or COM2)
with these settings:
• Hardware Flow Control: ON
• Data Bits: 8
• Parity: None
• Stop Bits: 1
UNIX based instructions:
• Use ‘cu’ to connect to the serial port (usually ttyS0 or ttyS1) with this command:
• cu -l ttyS0 -s 9600
Chapter 4: Initial Configuration
18
DHCPatriot Version 6 Operations Manual This document © 2017 First Network Group Inc. All Rights Reserved
Serial Port Adapter Female RJ45 Pin Out
Serial Port Adapter Female RJ45 Pin Out
Serial Port Adapter Female RJ45 Pin Out
Serial Port Adapter Female RJ45 Pin Out
PIn #
Color
Pin #
Color
1
Unused
6
Orange
2
Black
7
White
3
Yellow
8
Blue
4
Brown
9
Unused
5
Green
Unused
Red
Summary of Contents for DHCPatriot Version 6
Page 1: ...Operations Manual Version 6...
Page 2: ......
