6189N-SFC
F
12
10.2 Patch Wi-Fi modules installed before the notice
Wi-Fi module installed note:
1. Please press 1 : 1 and then expand outward proportion to 0.7 mm, 0.12 mm thickness
When open a stencil.
2. Take and use the WIFI module, please insure the electrostatic protective measures.
3. Reflow soldering temperature should be according to the customer the main size of
the products, such as the temperature set at 250 + 5
℃
for the MID motherboard.
About the module packaging, storage and use of matters needing attention are as
follows:
1. The module of the reel and storage life of vacuum packing: 1). Shelf life: 8 months,
storage environment conditions: temperature in: < 40
℃
, relative humidity: < 90% r.h.
2. The module vacuum packing once opened, time limit of the assembly:
Card:1) check the humidity display value should be less than 30% (in blue), such as:
30% ~ 40% (pink), or greater than 40% (red) the module have been moisture absorption.
2.) factory environmental temperature humidity control:
≦
-30
℃
,
≦
60% r.h..
3). Once opened, the workshop the preservation of life for 168 hours.
3. Once opened, such as when not used up within 168 hours:
1). The module must be again to remove the module moisture absorption.
2). The baking temperature: 125
℃
, 8 hours.
3). After baking, put the right amount of desiccant to seal packages.
