FMUSER INTERNATIONAL GROUP INC.
广州市汉婷生物科技开发有限公司
10
/
41
goes like this, power switch is on the left ,power supply socket is on the right
and the fuse is just between them.
l
Connecting Power Cord
User can insert one end into power supply socket, while insert the other
end to AC power.
l
Connecting Grounding Wire
When the device is solely connected to protective ground, it should adopt
independent way, say, share the same ground with other devices. When
the device adopts united way, the grounding resistance should be smaller
than 1Ω.
F
Caution:
Before connecting power cord to FUTV4207A multiplexer, user should
set the power switch to “OFF”.
2.4 Signal Cable Connection
The signal connections include the connection of input signal cable and the
connection of output signal cable. The details are as follows:
2.4.1 ASI In and ASI out connection:
l
ASI Input Connection
User can find ASI input port on the device according to connector mark
described in the rear panel illustration, and then connect the ASI cable (in the
accessories). One end is connected to the Multiplexer’s ASI input port, while
the other end is connected to Encoder’s ASI output port or ASI output port of
other equipment.
l
ASI Output Connection
