www.fmuser.org
www.fmuser.org
15
During the system boot up, company logo is displayed and all LED on front panel blinks 4
times (power LED is on). After system booting up, it enters to the page displaying frequency and
power set.
9.2.2 Main menu page
Figure 9-2 Main menu page
Figure 9-2 shows main menu page. This page contains the parameter as following:
RF SWITCH: RF switch control select between ON or OFF.
FWD POWER: forward power display only.
RFL POWER: reflected power display only.
AMP VOLTAGE: amplifier voltage display only.
DRV CURRENT: preamp current display only.
AMP CURRENT: power amplifier current display only.
[VIEW] parameter data browse menu, see [VIEW] menu.
[STATUS] system running status, see [STATUS] menu
[SET] parameter setting menu, see [STATUS] menu.
9.2.3 VIEW Page
