Operation Manual RTM MP System
06.09.2017
11
4.5
Mounting and Wiring the Transmitter EMGZ482T.MP.24VDC
One or two force sensors can be connected to the RTM-Transmitter. It is favourably to
mount the EMGZ482T.MP.24VDC transmitter close to the RMGZ load cells to keep
the signal cables short.
If no standard FMS cables are used, the connection between force sensors and
transmitter must be wired with 2x2x0.25mm
2
[AWG 23] shielded twisted-pair cable.
The wiring diagram below (Fig. 4) shows how the signals are wired to the connectors.
Fig. 4: Signal assignment EMGZ482T.MP
RTM-MP007e
Connectors are shown from the mating side.
