FMS-cradleGUARD Operating Manual and Installation Instructions
24.07.2019
7
4
Installation
4.1
As-delivered Condition
FMS-cradleGUARD.R Receiver Module
-
IP address 192.168.000.090
-
Radio channel preset
FMS-cradleGUARD.T Transmission Module(s)
-
Radio channel preset
-
To keep them apart, the individual transmission modules are labeled with individual ID.
The ID can be found on a label on the housing.
-
The batteries are enclosed and must be inserted.
4.2
Preparation
When installing the system components, the following conditions must be met to ensure
proper function.
The components may not be subjected to loads outside of the
specified values during installation and operation later.
The fastening points for supporting the components must be
designed correctly. Pay attention to proper installation of the FMS-
cradleGUARD.T transmission modules on the machine.
The sensors must be connected electrically correctly.
4.3
Installation of the FMS-cradleGUARD.T Transmission Module
The receiver modules must be installed on the cradle on a flat surface. The contact surfaces
must be as even as possible.
Use the enclosed fastening brackets for installation.
Figure 2: FMS-cradleGUARD.T
FMS_cradleGUARD_BA_Manual.ai