FMS-cradleGUARD Operating Manual and Installation Instructions
24.07.2019
19
Figure 8: Sensor Settings FMS_cradleGUARD_BA_Manual.ai
Web Interface – Sensor Settings
Column Description
ID ACTIVE
Using this checkbox, the transmission module with the
respective ID is activated.
As soon as it is activated, it appears in the “Current
Reading” window.
Terminal Block
1 to 3
Pintle left
The individual columns stand for the 3 sensors that can be
connected per transmission module.
3 different connection possibilities can be selected
Deactivated
No sensor is connected. The sensor status is not shown on
the display.
Active = 0 (NPN)
NPN: Sensor switches ground (GND)
Active = 1 (PNP)
PNP: Sensor switches the positive signal (+12 V)
Terminal Block
4 to 6
Pintle right
Terminal Block
7 to 9
Wire break / Tilt
switch
Table 9: Sensor Settings
Save changes
If you made changes, you must confirm them using “Save changes.”
Otherwise, your entries will be discarded once you leave the page!
You may have to scroll down on the page to see the save key.