Operating Manual EMGZ309._.EIP
43
Click on the “Close” button.
Close the “Network Connection” window
Close “Control Panel”
The computer is now ready to communicate with the EMGZ309 amplifier:
1.
Connect the “cross over cable” to both the EMGZ309 and to the appropriate
port on the desktop or laptop computer.
2.
Open Microsoft Internet Explorer or Mizilla Firefox.
3.
The default IP address for the EMGZ309 is 192.168.000.091 as long as it was
not changed over the operating penal. Enter the IP address in the address bar
and hit the Enter key. If a different IP address and subnet mask is configured at
the EMGZ 309 make sure that the computer is setup appropriate.
4.
The screen Fig. 24 will open up. Continue then with the procedure described in
chapter 9.1.
