FMS EMGZ Series, Operating Manual

Page: 10 / 41

Operating Manual EMGZ611A...614A
10
5 Quick Installation Guide
 Check all your requirements such as:
– configuration of the analog outputs (signal level)?
– gain switching required?
– digital input / output assignment?
– linking by interface etc.?

Draw your final wiring diagram according to the wiring diagram (refer to „7.2
Wiring diagram“)
 Install and wire all your components (refer to „7. Installation and wiring“)
 Parametrize and calibrate the measuring amplifier for each channel (refer to
„8. Operating“)
 Put system into operation; proceed a test run with low speed
 If required, do additional settings (refer to „8.4 Additional settings“)