FMS Eazy RC 540mm PA-18 Super Cub, Instruction Manual

Page: 5 / 24

A: Propeller set
B: Fuselage C: Main wing
D: Supporting bar set E: Pushrod
F: Front landing gear G: Rear landing gear
A. B.
E. F. G.
C.
D.
Before assembly, please inspect the contents of the kit. The photo below details the contents of
the kit with labels. If any parts are missing or defective, please identify the name or part number
(refer to the spare parts list near the end of the manual) then contact your local shop or email us:
support@fmsmodel.com.
1.Unplug the battery from your plane.
2.Carefully plug the charger into the USB
port on your computer or USB adapter.
3.Connect battery into the charger.
4.The charging process takes about 3.5
hours.For safety reasons, never charge
the battery for longer than 4 hours.
5. While charging, the red LED indicator will
be constant on.When the charging is
finished, the red LED will be off.
1.Install 4AA batteries(not included) in the
transmitter.
Transmitter assembly
05
Kit contents
Charging Instruction
Setup Instruction
EN