Operating Manual BKS 010
9
6.4
Open the housing
The housing of the electronic control unit can be opened by unscrewing the 4 philips screws
on the operation panel and pulling out the operation panel carefully.
Caution
The processor board is mounted directly behind the operation panel. Improper handling may
damage the fragile electronic equipment! Don’t use rough tools as screwdrivers or pliers!
Don’t touch processor board! Touch earthed metal part to discharge static electricity before
removing operation panel!
Caution
Disconnect power supply before open the housing!
7
Operation
7.1
View of the operating panel
BKS010
switch
sensor
left
mode
sensor
right
potentiometer
reference
fig. 5:
Operation panel
K010005e
•
Choose control mode: Activate mode by turning the rotary switch.
•
To adjust the reference position turn the potentiometer. The potentiometer must be
approximately in the middle otherwise the sensors are not in the center position.
