Operating Manual BKS 010
7
6
Installation and Wiring
Caution
Proper function of the FMS web guide is only guaranteed with the recommended application
of the components. In case of other arrangement, heavy malfunction can be the result.
Therefore, the installation instructions on the following pages must be followed strictly.
Caution
Local installation regulations are to preserve safety of electric equipment. They are not taken
into consideration by this operating manual. However, they have to be followed strictly.
6.1
Mounting the Steering Frame
When mounting the steering frame, the direction indicated on the frame side must correspond
with the web running direction.
The fixed lower frame can be easily fitted to the machine frame with the overhanging part.
Attach the appropriate sensor brackets to the sensors and then to the frame before installing
the frame on the machine.
The steering frame BKS010 is pre-wired; therefore is no wiring other then a 24V power
connection necessary by the customer.
6.2
Connecting the Electronic Control Unit
Connect 24VDC (18…36), min. 0.5A to electronic unit. Connect according to fig. 8.
Caution
Bad earth connection may cause electric shock to persons, malfunction of the total system or
damage of the control unit! It is vital to ensure that proper earth connection is done.