FMN B122plus, Instructions For Use Manual

Page: 8 / 16

8 9
Shortcode memory / Temporary switching dialling
4. Enter the PIN.
5.
Press the shortcode key
k
.
6. Press the desired digit key.
7. Enter the call number.
8.1. If you want to store another call number:
Press the shortcode key
k
and then another digit key and enter the call number.
8.2. If you do not want to store further call numbers:
Press the programming key
S
and the call number is stored automatically.
9. Replace the handset
Note:
Additionally, the recall key function (to get access to the telephone line) can be stored
with the entered call number by pressing the recall key
e
. If you entered a wrong digit
during the procedure of storing a call number, you can delete the last digit any time by
pressing the mute key
m
. You can proceed storing the call number without interrup-
ting the storing procedure. If your PIN is “0 0 0”, you can skip steps 3 and 4.
Deleting a stored call number
If you insert a new call number in one of the shortcode memories, the previously stored
call number is automatically deleted.
Dialling a call number using the shortcode memory
1. Lift the handset and await the dial tone.
2. Press the shortcode key
k
and afterwards the relevant digit key.
The stored call number is dialled automatically.
Suffix dialling:
There is an option to store only parts of a call number (e.g. a number of a customer) and
dial the remaining digits of the number (e.g. extension number) via the keypad.
Note:
Suffix-dialled numbers do neither appear in the shortcode nor in the redial memory. Call
numbers dialled using the shortcode keys are also not stored in the redial memory.
Temporary switching from pulse dialling to DTMF dialling
In case that your telephone is set to DTMF dialling, this section is of no significance for
you.
If your telephone works on pulse dialling, you can nevertheless transmit data or use other
services (paging systems and control your answering machine remotely) by switching
temporarily to DTMF dialling.
Temporary switching of the dialling mode:
during a call or after lifting the handset
1.
Press the programming key
S
.
2. Press the special key asterisk
s
.
3. Press the programming key
S
.
Your telephone is switched to DTMF dialling now. You can insert the relevant numbers
or follow the instructions for the features you require. If you want to switch back to pulse
dialling, e.g. for further inquiries, press the recall key
e
. Press the recall key again to
return to DTMF dialling. The telephone automatically switches back to pulse dialling when
you replace the handset or repeat steps 1 to 3 mentioned above.