FMN B122plus, Instructions For Use Manual

Page: 5 / 16

4 5
Installation / Maintenance / Operating panel
Installation and maintenance
The wall-mounted telephone is rugged and maintenance-free. The telephone should be
installed close to a TAE jack (German standard) at a conventional height of about 145 cm.
The design of the case leaves the option (when the wall socket is installed by authorised
specialists) of covering both the TAE jack and the telephone connecting cord.
The telephone is screwed to the wall with 2 hexagon-head screws and 2 washers (use the
drilling template provided in this manual). Screw the top hexagon-head screw into the wall
until the telephone can be placed on it without clearance. Even out the telephone hori-
zontally and screw the bottom hexagon-head screw tight using a spanner. To cover the
TAE jack, you have to use the measures in brackets ( ) of the drilling template. Store the
telephone connecting cord inside the case.
Tools required:
power drill / twistdrill - diameter 6 mm / open-jawed spanner
Use only a moist soft cloth or an antistatic duster to clean the telephone. So you avoid that
dust increasingly collects on the telephone due to static charging of the plastic material.
Do not use substances that damage the plastic surface of the phone.
Operating panel / key assignment
Redial key
w
In case that the line is busy or the party you called does not answer, replace the handset
or actuate the cradle switch. The telephone automatically stores the call number (max. 20
digits) dialled last.
Starting last number redial:
1.
Lift the handset.
2. Press the redial key
w
.
The telephone automatically dials the call number entered last.
Note:
If you have to press the recall key to get access to the telephone line (only applicable for
extensions), this function is stored together with the call number.