www.fmiproducts.com
125527-01E
27
INSTALLATION
Continued
INSTALLING BATTERIES IN
REMOTE CONTROL AND RECEIVER
WARNING: Make sure your
selector switch is in OFF posi
-
tion before installing or chang
-
ing batteries in your hand-held
remote or receiver.
Hand-Held Remote Control
The hand-held remote control uses 3 AAA
batteries (not included).
To install batteries:
1. Remove battery housing cover from back
of hand-held remote (see Figure 52).
2. Install or replace batteries.
3. Replace battery housing cover.
When batteries are installed, the "little house"
icon with current room temperature will be dis-
played (see Figure 53). This icon will always
show in the control window as long as the
batteries have power.
Figure 53 - Remote Display
+
+
-
+
-
-
AAA
AAA
AAA
Figure 52 - Battery Install Hand-Held
Remote Control
Battery Housing
Cover
Figure 54 - Battery Install Remote
Control Receiver
Battery Housing
Cover
Cover Plate
Screws
Receiver
Remote Receiver
The remote receiver uses 4 AA batteries (not
included). To install or replace batteries:
1. Locate receiver on right hand side of
unit.
2. Remove screws from cover place.
3. Remove battery housing cover.
4. Install or replace batteries.
5. Replace battery housing cover.
6. Replace cover plate.
f i r e - p a r t s . c o m
