www.fmiproducts.com
125526-01C
22
of this log needs to rest against the front
of the base assembly. Make sure the the
flame from the ember pan does not touch
the ember bed log.
INSTALLATION
Continued
4. The right ember bed log has a hole in the
bottom that sets on the grate finger and the
other end rest on the fireplace floor, place
log as shown in Figure 39. The back side
of this log needs to rest against the front of
the base assembly, make sure the flame
from the ember pan does not touch the
ember bed log.
Figure 38 - Installing Left Ember Bed Log
Figure 40 - Installing Left Middle Log
Figure 39 - Installing Right Ember Bed Log
Left Ember
Bed Log
Right Ember
Bed Log
Left Middle
Log
Hole
Underneath
Grate Prong
Figure 41 - Installing Right Middle Log
Right Middle
Log
Rear
Middle Log
Figure 42 - Installing Rear Middle Log
5. The left middle log has a groove on the
bottom to sit on the chassis and has to sit
on the tab on the back of the left front log
as shown in Figure 40.
6. The right middle log has a groove on the
bottom to sit on the chassis and has to sit
on the tab on the back of the right front. The
right middle log should have a recess area
that fits around the ramp log as shown in
Figure 41.
7. The rear middle log should fit between the
ramp log and the rear burner. The left and
right middle logs have recessed areas for
the rear middle log to sit into (See Figure
42).
8. Rest rear log in back corner sections of
chassis assembly as shown in Figure 43,
page 23.
