FMI PTW72, Manual

Page: 10 / 335

enables control of the outfeed conveyor from the pull thru welder control
panel.
r.
Web Outfeed – Use to control the direction of the outfeed conveyor.
Pull Thru Welder Controls
Pull-Thru-Welder Operator Controls
a . E-STOP/CONTROL POWER - Removes AC power to all PLC outputs.
Pull UP to enable.
b. PTW INFEED Jog/Run - PTW OUTFEED Jog/Run - Selector switch to
activate manual control of conveyor. When in Jog conveyor will be
operated by the PTW INFEED (or OUTFEED ) -Rev/Fwd selector switch.
When RUN is selected the conveyor(s) will run continuous and at a higher
rate than when JOG is selected.
c. PTW INFEED- REV/FWD; PTW OUTFEED-REV/FWD- Use to manually
jog the infeed and outfeed conveyors. Hold PTW INFEED in REV to move
the infeed conveyor in the reverse direction. Hold the PTW INFEED in
FWD to move the infeed conveyor in the forward direction. Conveyor(s)
5