www.fmiproducts.com
125883-01C
11
INSTALLATION
Continued
12. Place concrete cap on the top layer of blocks.
Center cap on block. Level and shim if neces-
sary (See Figure 16).
13. Insert access door into hole as shown in Figure
17.
Figure 16 - Concrete Cap
(MM2FR Shown)
Figure 17 - Access Door
(MM2FR Shown)
INSTALLING LAVA ROCK
Lava rock comes with the burner system in two
boxes each weighing around 42 pounds. Lava rocks
range in size. Begin by placing the smaller rocks
between the burner tubes filling the whole pan in
a single layer of rocks. Avoid placing rocks on the
pilot shield. They will obstruct the view of the pilot
when you go to light the pilot. You may want to
light the pilot first before adding the lava rock (see
Lighting Instructions
, page 12). Place larger rocks
in a second layer in a smaller circle in the center
of the fire ring. Lastly place the largest rocks in the
center making a teepee formation.
