www.fmiproducts.com
125368-01D
23
INSTALLATION
Continued
Figure 45 - Installing Log # 9
Figure 44 - Installing Log # 8
Figure 43 - Installing Log # 7
7. Place the right rear chunk log (#7) on top
of the middle log (#2) and rear log (#1)
as shown in Figure 43. Match the round
peg on the top of the rear log (#1) with
the round hole on the bottom of the right
rear chunk (#7) log and square peg on
the top of the middle log (#2) with the
square hole on the bottom of the right
rear chunk log (#7).
7
8. Place the front right mid log (#8) on top of
the front right log (#4) as shown in Figure
44. Match the round metal pin on the top
of the front right log (#4) with the round
hole on the bottom of the front right mid
log (#8).
9. Place the top right log (#9) on top of the
right rear chunk log (#7) and front right
mid log (#8) as shown in Figure 45.
Match the round peg on the top of the
right rear chunk log (#7) with the round
hole on the bottom of the top right log
(#9) and square peg on the top of the
front right mid log (#8) with the square
hole on the bottom of the top right log
(#9).
8
9
Round
Peg
Metal Pin
Round
Peg
Square
Peg
Square Peg
10. Place the right rear top log (#10) on
top of the right rear chunk log (#7) as
shown in Figure 46, page 24. Match the
rectangular peg on the top of the right
rear chunk log (#7) with the rectangular
hole on the bottom of the right rear top
log (#10).
11. Place the left top log (#11) on top of the
left back top log (#5) and left top forked
log (#6) as shown in Figure 47, page 24.
Match the round peg on the top of the left
top forked log (#6) with the round hole
on the bottom of the top left log (#11)
and rectangular peg on the top of the
left back top log (#5) with the rectangu-
lar hole on the bottom of the top left log
(#11).
