background image

 

Factory built Fireplace Retro-Fit Installation

 

 

                      FMI Products LLC

    

 

 

 

 

 

Warranty 

 

 

 

 

FMI Products LLC (FMI) hereby  warrants to the consumer who purchases a  PureFire

™ Emission Control 

System  for  Wood  Burning  Fireplaces  as  a  new  product,  to  replace  the  catalytic  component  at  no  charge 
should it cease to function from normal operation within three years from the date of purchase.  
 
The PureSKY™ Catalytic System is designed to perform efficiently for a minimum of three years or 3000 
hours  of  normal  operation.  ONLY  recommended  fuels  should  be  burned.  Follow  the  fueling  directions  in 
manufacturers  operating  manual.  For  warranty  replacement,  proof  of  PureFire

™  purchase  and  return  of 

defective  unit  is  required.  Labor  for  removal  and/or  re-installation  of  the  catalytic  component  will  NOT  be 
the  responsibility  of  the  manufacturer.  This  warranty  applies  only  to  PureFire  catalytic  components 
manufactured and sold by FMI Products LLC.  
 
For  replacement  of  a  PureFire  catalytic  combustor  or  to  file  a  warranty  claim  under  the  conditions  of  this 
warranty,  please  contact  the  PureFire

™  manufacturer  or  complete  the  Warranty  Return  Form  that 

accompanied the new PureFire retro-fit unit. 

 

FMI Products warrants this unit to be free of defects in materials and workmanship for a period of one (1) 
year  from  the  date  of  purchase.  If  the  unit  should  malfunction,  it  must  be  returned  to  the  factory  for 
evaluation. FMI's Customer Service Department will issue an Authorized Return (AR) number immediately 
upon phone or written request. Upon examination by FMI, if the unit is still under warranty and found to be 
defective it will be repaired or replaced at no charge.  
 

Warranty/Disclaimer

 

FMI's WARRANTY does not apply to defects resulting from any  action of the purchaser, including but not 
limited  to  mishandling,  improper  use,  operation  outside  of  design  limits,  improper  repair,  or  unauthorized 
modification. This WARRANTY is VOID if the unit shows evidence of having been tampered with or shows 
evidence  of  being  damaged  as  a  result  of misapplication;  misuse  or  other  operating  conditions  outside  of 
FMI's control.  

 

FMI  is  pleased  to  offer  suggestions  to  customers  regarding  its  products.  However,  FMI  neither  assumes 
responsibility for any omissions or errors nor assumes liability for any damages that result from the use of 
its products in accordance with information provided by FMI, either verbal or written. FMI warrants only that 
the parts manufactured by it will be as specified and free of defects. 

 
FMI  MAKES  NO  OTHER  WARRANTIES  OR  REPRESENTATIONS  OF  ANY  KIND  WHATSOEVER, 
EXPRESSED OR IMPLIED, EXCEPT THAT OF TITLE,  AND  ALL IMPLIED WARRANTIES  INCLUDING 
ANY  WARRANTY  OF  MERCHANTABILITY  AND  FITNESS  FOR  A  PARTICULAR  PURPOSE  ARE 
HEREBY DISCLAIMED.

 

 

Contact: 

FMI Products LLC 

2701 South Harbor Blvd. 

Santa Ana, CA 92701 

 

Email: [email protected] 

 

 

www.fmiproducts.com

 

 
 
 
 

Summary of Contents for AH3143P







Reviews: