Section I – Connecting via Ethernet
Page 4
AB06064 · Issue/Rev. 0.0 (5/06
)
►
Uncheck all of the boxes EXCEPT the check box for “Internet Protocol (TCP/IP)”
Make sure that the “Internet Protocol (TCP/IP)” line is selected then click ‘
Properties’
Select “Use the following IP address”
Enter an IP address on the same network as the microLoad, i.e.
192.168.0.10
(Make sure the host address is different than the microLoad.net!)
Enter the subnet mask:
255.255.255.0
Click
OKAY
when finished
Click
OKAY
again to exit the Local Area Connection dialog
Continue with the section titled Establishing and Verifying a Successful Connection
Summary of Contents for Smith Meter microLoad.net
Page 2: ......
Page 4: ......
Page 17: ...Appendix II Troubleshooting AB06064 Issue Rev 0 0 5 06 Page 13 ...
