20
Issue/Rev. 0.6 (2/06)
www.fmcinvalco.com
The specifications contained herein are subject to change without notice and any user of said specifications should verify from the manufacturer that the specifications are
currently in effect. Otherwise, the manufacturer assumes no responsibility for the use of specifications which may have been changed and are no longer in effect.
FMC INVALCO
Fluid Control P.O. Box 1377, Stephenville, TX 76401, Phone: 254/968-2181, FAX: 254/968-5709, Toll Free: 800/468-2526
Printed in U.S.A. ©2/04 FMC INVALCO All rights reserved. Issue/Rev. 0.1 (2/04)
Dimensions
The 4200 Wall/Panel mounted version can be mounted with an offset utilizing the supplied bracket, or it can be mounted directly
to a panel or wall using the 4 tapped holes located on the back of the unit.
Direct Mount
Wall Panel Mount
The 4200-30 and 4200-31 are direct mounted. Care must be taken the follow these steps during installation:
1.
Screw Pickup into TFM body, hand tight (do not over tighten).
2.
Attach wires to Pickup.
3.
Loosen screws on swivel (do not remove).
4.
Hold totalizer body steady and screw swivel-neck onto TFM threaded adapter. Hand tighten (do not over tighten)
5.
Adjust totalizer for required viewing position.
6.
Retighten swivel neck screws.
Note:
Dimensions - Inches to the nearest tenth (millimeters to the nearest whole mm), each independently dimensioned from respective engi-
neering drawings.
