5
Insert the pushrod wire through the hole in the metal
connector that is pre-installed to the rudder. Screw
one of the red nylon screw connectors into the metal
connector, securing the wire to the connector.
Repeat this for the elevator.
This completes the installation of the tail assembly. We
will make fi nal adjustments when we set up the radio.
INSTALL THE LANDING GEAR
Locate the
main landing gear
. Slide the landing gear
into the slot in the bottom of the fuselage as shown.
Locate a red nylon thumb screw and thread it into
the fuselage to hold the main gear in place.
