flyWithCE Flight Recorder Quick Start Guide
Copyright © flyWithCE 2015 - 2018
1
Before first use
Install flyWithCE Logbook
Download the latest version of flyWithCE Logbook application from flyWithCE web site
Run logSetupXXX.exe application and follow instructions (XXX represents flyWithCE Logbook
version).
Install USB driver
Make sure that you are connected to the Internet when you connect flyWithCE Flight
Recorder for the first time to your personal computer. Turn on the flight recorder. Windows
operating system will detect new device and automatically download and install USB device
driver.
Enter waypoints (airports) and tasks
In flyWithCE Logbook you can enter waypoints (airports) and tasks. First switch to appropriate
screen by pressing Waypoints and Tasks buttons in top right corner. Then press New button in
the bottom right corner to enter new waypoint or task.
You can also import waypoints and tasks by selecting Tools – Import Waypoints and Tasks
menu option. Following file formats are currently supported:
-
SeeYou file format (CUP file extension)
-
BGA waypoint file format (TXT file extension)
Note: You should enter airports where you will fly, because they will be then used during flight
declaration.
Note: For each airport define appropriate UTC offset. flyWithCE Logbook will then display
times in local times. If airport is not defined or UTC offset is not entered, then all times will be
displayed in UTC (there is letter
U
after each time).
