flyWithCE Flight Recorder Quick Start Guide
Copyright © flyWithCE 2015 - 2018
3
During flight
Please follow procedure:
1.
Turn on the flyWithCE Flight Recorder.
2.
Position device so that the button is turned up and that device has clear view of the
skies.
3.
Check device status:
a.
Blue LED is on: decide is acquiring GPS position.
b.
Blue LED is flashing: GPS position acquired and device is recording.
4.
As soon as the blue LED is flashing you can take off.
5.
Press button to record pilot event, which will be then also be recorded in IGC file.
After the button is pressed blue LED will blink quickly few times.
Important: Improper position of the device could impair GPS signal reception. This may result
in flights not being recorded correctly.
Note: If you will take several flights in one day, then please turn off the device for one minute
after each flight. flyWithCE Logbook can detect individual flights, but switching off the device
will ensure that the flights are correctly saved in separate IGC files.
