background image

EN

GL

ISH

9

FL

iG

HT

 TE

CH

Ni

qU

ES

 A

ND

 C

HA

RA

CTE

Ri

ST

iC

S

05 FLiGHT TECHNiqUES AND CHARACTERiSTiCS

Flight feeling on the water 

 

The feedback from the VMG increases proportionally with the power you generate. This makes it very a predictable kite even in 
turbulent conditions, the VMG continuously gains forward speed. The depower is very efficient and provides the necessary security, 
the turning radius is large. FLYSURFER recommends pulling large radii during a jibe and keeping the line tension steady during 
maneuvers. 

Flying the kite on the beach 

 

The VMG gives hardly any bar feedback when you are not in motion or while it sits in the zenith. FLYSURFER recommends active 
flying of the kite or parking it at the zenith to avoid flying overhead in light wind. Shortening the back lines of your control bar by ~ 
5cm supports this technique. 

Body drag   

Hold your VMG as close to the zenith as possible to prevent the wingtips from rolling. Especially in light wind, always keep your stee-
ring lines on tension. As soon as the kite is flown in the recommended wind range, there are no special handling techniques required. 

waterstart

   

The VMG must be sent into the opposite soft zone of your starting direction by using the steering lines. Make sure that the wingtips 
remain open and let the kite shoot through the power zone into your starting direction. Downlooping will not lead to a successful 
water start due to its large turning radius.

Relaunch   

The rigid construction of the VMG makes it difficult to relaunch the kite. With the leading edge pointing towards the water, the kite 
tends to be better restarted by using two steering lines. If the VMG is used in marginal wind, it must be laid onto the upper sail and 
pulled up by using on steering line. We recommend our tutorial to master this technique. 

05.01  Technische Daten

VMG2

8

9

10

11

13

Area (projected)

6.80

7.65

8.50

9.35

11.05

Aspect Ratio

6.60

6.65

6.70

6.75

6.80

Cells

55

55

55

55

55

Flat Wing Span (cm)

715

761

805

848

925

Weight = complete mixer (kg)

1.84

2.00

2.14

2.30

2.60

Recommended barsize (cm)

55 

55

55

55

55

VMG2

15

18

21

23

Area (projected)

12.75

15.30

17.85

19.55

Aspect Ratio

7.00

7.20

7.30

7.40

Cells

63

63

63

63

Flat Wing Span (cm)

1009

1122

1221

1286

Weight = complete mixer (kg)

2.76

3.18

3.58

3.86

Recommended barsize

55

55

55

55

Summary of Contents for VMG2





















Reviews: