EN
52
Lay the tips on top of each other,
and then the bar on top and roll up the
kite. Be careful with the bridle lines
and stow them as best you can within
the two halves of the kite when rol-
ling it up. you can open the deflate
valves to make rolling it up easier.
Secure the package with the harness.
Tip
: In shallow areas where
it is possible to walk, you can
drag the kite back to shore.
When doing this it is recom-
mended to have the kite as
described in “Securing the
kite“ and then drag it in by by
holding the middle air-intake
valve. This way no water can
get into the kite and greater
distances can be covered.
10 PACKING UP
A Flysurfer kite can be packed into its
bag very quickly. It is important that
the bridle is securely packed inside
the kite and the bar never gets into
or goes through the bridle lines.
Open the deflate valves.
Wind the lines round the bar until
you get to the mixer. Secure the lines
with the elastics or a half hitch. Keep
hold of the bar, or put it down somewhe-
re out of the way of the bridle lines.
Fold the kite in half along the
middle (tip on tip) and make sure
that the bridle is inside both halves.
Also make sure that there are no
bridle lines over the outside skin.
Summary of Contents for SONIC FR Series
Page 1: ...GEAR GUIDE...
