84
It is used to set the interval between pulses. The setting
range is 20% to 100%. The default value is 50%. The larger
the value, the longer the interval time between pulses.
The value 100% indicates the interval is 0.5S.
Cycle
It is used to set the start position of pulse brake function.
The setting range is 20% to 100%. The default value is
30%. The higher the value, the closer the stick position
that triggers the pulse brake function is to the full
brake position. 0%-100% is the entire travel movement
amount of the throttle trigger.
Point
Function setup:
1.
Tap
Cycle
to enter the setting interface.
2. Click
+
or
-
to set the appropriate value.
Click to return to the previous interface.
Function setup:
1.
Tap
Cycle
to enter the setting interface.
2. Click
+
or
-
to set the appropriate value.
Click to return to the previous interface.
Function setup:
1.
Tap
Cycle
to enter the setting interface.
2. Click
+
or
-
to set the appropriate value.
Click to return to the previous interface.
To set the braking - release cycle length in pulse braking
between -4 and +4. Default: 0. When the value is changed,
the peak and trough lengths of the brake pulse's square
wave change accordingly. You can adjust the ratio
between braking and release. The rate is 1:1 when the
cycle length is set to "0". The rate is 1:2 when the cycle
length is set to "1". And the rate is 2:1 when the cycle
length is set to "-1".
Duty
