Website
41
Function Settings:
Function Settings:
1. Tap
Duty.
2. Click + / - to change to an appropriate value.
1. Tap
Timer1
to enter.
2. Select timer type.
3. Select
Down timer
or
Down then up
, click + / - to set time,
the default time is 5 minutes, if
Up timer
is select, ignore
this step.
4. Tap
Start
to start the timer, and click
Stop
to stop the
timer, to reset the timer, click
Reset
. You can also click
to assign a switch corresponding to start, stop or reset the
timer.
Duty
Used to set the braking to release cycle length in pulse
braking between -4 and +4. The default valus is 0. When
the value is changed, the peak and trough lengths of the
brake pulse's square wave change accordingly. You can
adjust the rate between braking and release. The rate is 1:1
when the cycle length is set to "0". The rate is 1:2 when the
cycle length is set to "1". And the rate is 2:1 when the cycle
length is set to "-1".
7.18 Timers
This function allows you to set various timers, which are generally used to calculate the total model running time,
competition specific time spent or transmitter running time, etc.
Timers 1 and Timers 2 have the same function. Only one
timer setting method is introduced below.
7.18.1 Timers 1/2
To enter the menu assigned switch.
Tap to start the timer.
Tap to reset the timer.
