BatteryPack
Stereospeakers
Batterylock
DCOutport
DCinport
Icons
Operation Instruction
Function Icons
‐
Screen Icons
There are different icons in different working modes.
When batter y icons shows as it means the batter need be recharged
or changed
Power on/off
Working Mode
Diversity Mode
Diversity Mode
AV IN Mode
HDMI Mode
Press the power button until the device is on,the red indicated light will be on.
The due antenna diversity receiver is made up of ANT1、ANT2 and receiving circuit,
according to their RSSI output,the device can keep receive the strongest signal all the
time. and maximize image display stability.
Antenna LED will show the current stronger one.
< - > and < + > button controls the channel change.
DIV AV OUT outputs diversity receiving signal for video recorder and external display
purposes.
DIV AV OUT ONLY works under the diversity mode.
Under this mode, the channel of RX1 and RX2 can be set up separately; can set up
the current shown video signal of RX1 or RX2 by mode button.
< - > button controls RX1 channel,< + > button controls RX2 channel.
Rx1 AV OUT and RX2 AV OUT output the corresponding channel of themselves,the
device can receiver the video signals from 2different transmitters at the same time.
If there is only o ne transmitter w orking, t here is no different to use RX1 a nd RX2.
If there are two transmitters working,Please pay attention to adjust the bang and the
channel,let each other dose not affect the image effect.
For inputting external video and audio signal.
In AV IN mode, wireless receiving circuit automatically shut down to save battery life.
HDMI can input HD video to show much clearer image,and automatically adapt to
the resolution (the maximum input 1920X1080/60Hz).
In HDMI mode,wireless receiving circuit automatically shut down to save batter y life.
Press the mode button in the HDMI mode, may slow response, this is a normal
phenomenon, because HDMI mode requires multiple attempts to connect with an
external device, after success connecting,the device can quickly display.
Press mode button can set up: DIV、RX1、RX2、AV IN、HDMI IN model.
Video TV system set-up(except HDMI mode): Press menu button to enter ‘function’,
Video TV system set-up(except HDMI mode): Press menu button to enter ‘function’,
then ‘Video sys’ to choose PAL or NTSC.
Under DIV、RX1、RX2 modes,you need press menu button first to enter RF to set up
the frequency band to make sure,the device Work with the transmitter in the same band.
5
4
M
On/Off Button Meun/Esc
Mode Button Menu:Enter
Volume Down Meun:Down
Volume Up Meun:Up
Diversity mode:Channel
down RX1 mode:Channel
set
Diversity mode:Channel
up RX2 mode:Channel
set
MODE:DIV BAND:E CH:1
Operating Mode Receive Band
Receive Channel
Battery Icon
Antenna Port(SMA)
Antenna LEDs
Screen
Hood slot
RX1 AV OUT
RX2 AV OUT
DIV AV OUT
AV IN
HDMI IN
Charging LED
Power Led
Key panel
Tripod thread
