Flyron Technology Co., Ltd.
FN-AL7T Triggerable MP3 Sound Player
E-mail: [email protected]
4
words, the file that is to be loaded first in the storage device will be associated with input 1. The last file to be loaded in the
storage device will be associated with input 7. In order to guarantee a correct ‘one-on-one’ order, please refer to the following
steps.
1). Build a new folder on the computer and put the 7 audio files into this new folder.
2). Rename the audio files from 001.mp3/wav to “007.mp3/wav”, and make sure they are ranked from “001.mp3/wav” to
“007.mp3/wav” in order.
3). Connect the equipment with computer through the USB cable, and you will see a simulated USB flash drive /
removable disk.
4). Delete the sample audio files pre-loaded at factory for testing purpose.
5). Back to the folder and select all of the 7 audio files in the folder.
6). Right click on the first file (001.mp3/wav) and choose "Send to removable disk".
7). This should send the 7 audio files to the memory in a correct sequence.
8). Put the prepared configuration file into the root directory together with audio files and then refresh.
Refer to the image below.
9). Safely remove the USB cable from computer.
10). Apply power to the equipment and push any of 7 buttons to play back a corresponding sound.
3.3. Example of Wiring Connection